KHARAFI NATIONAL JOB OPENINGS | KUWAIT | U A E
Cable Tray Fitters | Kuwait
Qualification
Candidate with experience in the field of construction,
Petrochemical and Oil & Gas Field (Gulf experience preferred but not a
must).
Experience Details
2 to 5 years in Electrical works in Oil & Gas Fields.
Duties and Responsibilities
-Capable to install different types and sizes of cable trays
-Experienced to fabricate and modify cable trays routing
according to diagrams.
Familiar with earthing works
-Basic experience in conduit installation, wiring, and
electrical panel board termination
-Able to communicate in English language
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 2 Years
Maximum Work Experience: 5 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
For more Click here
Conduit Fitters | Kuwait
Qualification
Minimum School Final Education
Experience Details
10 years in P&C projects
Duties and Responsibilities
-Should have experience in P&C projects for minimum 10
years in this position.
-Should be able to read and understand cable tray and conduit
layouts.
-Should be able to communicate in reading and writing in
English.
-Should be able to handle with different types of conduit
materials & material classification coversant.
-Should be conversent with sealing methods in P& C
projects.
-Should have knowledge for Safety awareness in P&C
projects.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 10 Years
Maximum Work Experience: 15 Years
Age: Not Specified To: Not Specified
Qualification: Other
For more Click here
Instrument Technicians | Kuwait
Qualification
Minimum School Final Education
Experience Details
10 years as Instrument Technician in Oil & Gas Fields.
Duties and Responsibilities
-Should have experience in P&C projects for minimum 10
years in this position.
-Should have knowledge to work with P&ID, Loop wiring
diagram, data sheets, Instrument technician and other drawings.
-Should be able to communicate in reading and writing in
English.
-Should be able to handle with different types of
instruments calibration &loop checking
-Should have experience in preparation of calibration &
loop check repots.
-Should have knowledge for Safety awareness in P&C
Projects.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 10 Years
Maximum Work Experience: 15 Years
Age: Not Specified To: Not Specified
Qualification: Other
For more Click here
Instrument Fitters | Kuwait
Qualification
Minimum School Final Education
Experience Details
10 years as Instrument Fitter in Oil & Gas Fields
Duties and Responsibilities
-Should have experience in P&C projects for minimum 10
years in this position.
-Should have knowledge to understand instrument cable tray,
conduit layouts and hook up drawings.
-Should be able to communicate in reading and writing in
English.
-Should be able conversant with hook up material and
material classification.
-Should have familiar with different kind of instrument work.
-Should have knowledge for Safety awareness in P&C
projects.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 10 Years
Maximum Work Experience: 15 Years
Age: Not Specified To: Not Specified
Qualification: Other
For more Click here
Cable Jointers | Kuwait
Qualification
Minimum School Final Examination / ITI in Electrical
Experience Details
5 years as Cable Jointer Oil & Gas Fields
Duties and Responsibilities
-The candidate must have minimum knowledge in Electrical
Field, Different types of cables and different types of joints.
-A minimum of 5 years experiences in 11 k V Cable Joint and
cable terminations is a must.
-The candidate must have previous work certificates and
client approvals from earlier projects.
-The applicant must have good awareness of tools, safety
requirements and knowledge of accessories as per the packing list.
-The Jointer shall verify the safe working area and obtain
the hot work permit from concerned departments.
-The candidate must have the knowledge about the crimping
tool and knowledge of using correct size of dies and hydraulic pressure to do
the job.
-Knowledge to remove the semiconductor by stripping and
scrolling tools.
-The candidate shall have good knowledge how to remove the
each crossection as per correct dimension, cleaning of surface, application of
yellow void filling tape and then stress control tube.
-The candidate have to know how to connect copper brading,
Steel armor and
Lead armor.
Knowledge of using correct type of Heating torch and the
flame. (shall be yellow flame with blue tip)
-Shall know the procedure to crimp the ferrules. (shall be
from centre to ends).
-Candidate have the awareness of right method for tube
shrinking.(shall be from centre to ends.)
-Knowledge in tests to be conducted prior and after the
joints.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 5 Years
Maximum Work Experience: 10 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
For more Click here
Electricians | Kuwait
OFFICE TIMING: 10.00 AM TO 5.00 PM (MON TO SAT)
Qualification
Secondary School Certificate required / ITI in Electrician
Experience Details
10 years as Electrician in Oil & Gas Fields
Duties and Responsibilities
-Should have experience in P&C projects for minimum
10years as Electrician.
-Should have knowledge of installation of supports for JB,
LP, FP and Cable trays.
-Should have knowledge of installation of instruments on the
supports
-Should have knowledge of Laying, Dressing and Tagging of
Electrical cables, Glanding and termination including earthing.
-Should have knowledge of installation of all types of cable
trays on supports.
-Supervision of final touch up and painting of supports.
-Installation Electrical Equipments, LV/HV panels and Bus
duct and related substation works.
-Should meet all safety requirements while performing the
works.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 10 Years
Maximum Work Experience: 15 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
For more Click here
Instrument Foremen | Kuwait
Qualification
Technical Course 2 Years
Experience Details
5 to 8 years as Foreman Instrument in Oil & Gas Fields.
Duties and Responsibilities
-Minimum 10 years minimum experience in such field. Know how
to make terminations, glanding, cable pulling and dressing. Know how to read
and understand P&ID and Instrument drawings.
-Preparation of daily reports, manpower handling,
coordination with supervisors, communication skills, awareness safety in
P&C projects.
-Arrange materials for his work and ensure availability of
all essential spares and tools.
-Ensure safety of all personnel working under him
-Inform supervisor regarding all dangerous and unsafe
conditions. Take immediate steps to isolate electrically the equipment in case
of electrical hazards. Gives warning to staff.
-Ensure most efficient utilization of staff under him. Keeps
a log of work carried out and submits reports of work to engineer. Submit daily report about the works.
-Ensure training of all staff / users safe use of tools.
-Installation of equipment/instrument ensures compliance
with approved construction drawings and approved method of installation.
-Plans the work of the next days and ensures that all
materials, tools and drawings are available.
Ensures schedules are maintained.
-Capable of controlling electricians a instrument/conduit
fitters at job site with their crews.
-Instrument Calibration and loop check.
-Able to read / write and speak English fluently.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 5 Years
Maximum Work Experience: 10 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
For more Click here
Electrical Foremen | Kuwait
Qualification
Technical Course 2 Years
Experience Details
5 to 8 years as Foreman Electrical in Oil & Gas Fields.
Duties and Responsibilities
-Arrange materials for his work and ensure availability of
all essential spares and tools.
-Ensure safety of all personnel and safe upkeep of all
electrical equipment.
-Inform supervisor regarding all dangerous and unsafe
conditions. Take immediate steps to
isolate electrically the equipment in case of electrical hazards. Gives warning
to staff
-Ensure most efficient utilization of staff under him. Keeps a log of work carried out and submits
reports of work to engineer. Submit
daily report about the work.
-Ensure training of all staff/users safe use of electrical
tools.
-Installation of equipment ensures compliance with approved
construction drawings and approved method of installation.
-Plans the work of the next days and ensures that all
materials, tools, and drawings are available.
-Ensures use of certified calibration tools. Ensures schedules are maintained.
-Capable of controlling a minimum of six (6) electricians at
job site with their crews.
-Able to read/write and speak English fluently.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 5 Years
Maximum Work Experience: 8 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
For more Click here
Riggers | Kuwait
Qualification
Minimum School Final Education
Experience Details
5 to 10 years as Rigger in Oil & Gas Fields.
Duties and Responsibilities
-Should have experience in P&C projects for minimum 10
years as Rigger.
-Should have knowledge in rigging on heavy & precious
equipment, piping and structural works.
-Able to read and write English.
-Should be able to handle different types of cranes.
-Should be conversant with international signals for
rigging.
-Should have knowledge for Safety awareness in Rigging of
lifting tools & tackles.
Industry Type: Petroleum/Oil&Gas/Projects/Infrastructure/Power/
Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 5 Years
Maximum Work Experience: 10 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
For more Click here
Pipe Fitters | Kuwait
Qualification
Candidate with experience in the field of Construction,
Petrochemical and Oil & Gas Field (Gulf experience preferred but not a
must).
Experience Details
5 to 10 years in Piping Installation in Oil & Gas Fields
Duties and Responsibilities
-Capable to read Isometrics drawings
-Assemble, install, and maintain piping and piping systems,
fixtures
-Familiar with most of piping material that can be used in
Oil & Gas Operations.
-Plan sequence of installation to avoid obstructions
-Cut pipe, using hacksaw, pipe cutters, hammer and chisel,
cutting torch, and pipe cutting machine.
-Thread pipe, using threading machine
-Bend pipe by hand or with pipe-bending machine
-Assemble and install variety of metal and nonmetal pipe and
pipe fittings, including those made of brass, copper, lead, glass, and plastic.
-Join piping by means of threaded, caulked, wiped, soldered,
brazed, fused, or cemented joints.
-Work within precise limits or standards of accuracy.
-Work easily and skillfully with hands; lift and carry
objects weighing up to 150 pounds; see well (either naturally or with
correction); climb and maintain balance on high ladders and scaffolds; and
stand, stoop, kneel, or crouch.
-Able to read/write and speak English fluently.
Industry Type:
Petroleum/Oil&Gas/Projects/Infrastructure/Power/ Non-conventional energy
Functional Area: Production/Service
Engineering/Manufacturing/Maintenance
Area of Specialization: Workman/Foreman/Technician
Minimum Work Experience: 5 Years
Maximum Work Experience: 10 Years
Age: Not Specified To: Not Specified
Qualification: I.T.I
