SAUDI ARAMCO OIL & GAS COMPANY JOB OPENINGS | SAUDI ARABIA
Integrated Gasficiation Combined Cycle Engineering Specialist
The successful candidate will act as the company Technical
Authority for gasification, synthesis gas (syngas) and impurities removal; and
work with a large group of refining specialists to provide support to Saudi
Aramco’s refining facilities and technology programs.
Minimum Requirements
• A bachelor’s degree in chemical engineering or other
related engineering degree from an accredited university. A Professional
Engineer (P.E) or Chartered Engineer (C.Eng.) license or registration would be
desirable but is not essential.
• A minimum of 10 years of professional experience with
extensive design and operating experience in IGCC facilities, and in the latest
technologies for the production of syngas.
• Must have extensive experience in refinery processes.
• Must be able to demonstrate excellent written and oral
communication skills.
Apply Now
Refining & Distillation Engineer
Minimum Requirements
The
successful candidate must have the following experience, competencies and
skillsets:
A B.S. degree in chemical engineering, or other advanced
professional engineering degree is highly desirable.
A Professional Engineer (P.E.) license or registration would
be highly desirable.
Minimum of ten years of experience in design and operation
of the distillation and fractionation process (crude & vacuum distillation
and other refinery fractionation units).
Have sufficient experience to support and troubleshoot
refinery distillation and fractionation units, review and scope new capital
projects. And participate in project commissioning.
Expertise in column internal retrofits and familiarity with
industry practices, standards and procedures.
Be conversant with the use of process simulation software
such as HYSYS/PRO II.
Good command of English written and oral communications.
Experience in coaching and mentoring young and inexperienced
engineers.
Apply Now
Pipeline, Hydraulics & Simulation Engineering Specialist
Minimum Requirements
A bachelor’s degree or master’s degree in Chemical
Engineering or Mechanical Engineering from an accredited university
A minimum of 15 years of professional experience, including
10 years performing pipeline hydraulic simulations.
Must be able to demonstrate expertise in single and
multiphase pipelines hydraulic simulation.
Extensive expertise in steady-state and transient hydraulic
analyses using industry standard software like OLGA, SPS, PIPEPHASE and
PIPESIM.
Must be an expert in performing surge analysis on liquid
lines using simulation tools like SPS.
Experience in working with online pipeline monitoring
systems.
Experience of simulating gas networks.
Knowledge of flow assurance issues like hydrates, wax, etc.
Must be able to demonstrate excellent written and oral
communication skills.
Must be familiar with applicable regulations, codes and
standards.
Knowledge of CFD simulation experience is an advantage.
Apply Now
Engineering Specialist
Minimum Requirements
The successful candidate must have the following experience,
competencies, and skillsets:
1. A bachelor’s degree in an engineering-related discipline
is required; a master’s degree is preferred.
2. A minimum 10 years of progressively responsible
experience in standards development, including experience in the planning,
development, and dissemination of professional standards and experience with
technical committees and technical advisory groups.
3. Strong interpersonal skills for responding to the needs
of members, volunteers, and colleagues.
4. Demonstrated success in cultivating and sustaining
relationships with senior management from diverse organizations.
5. A consistent record of successful initiatives to broaden
industry presence and penetration, and/or influence industry standards.
6. Strong managerial skills, including the ability to work
with individuals in prominent and influential positions cross diverse
organizations.
7. Excellent meeting facilitation and public speaking
capabilities.
8. Strong verbal and written communication skills, including
public speaking to small and large groups.
9. Knowledge, experience, and the ability to travel
domestically and internationally, including on weekends and holidays.
10. Ability to use MS Office products and the Internet
proficiently, with the ability to work remotely using laptops in dynamic
environments while traveling.
Minimum Requirements
• 7 years
of formal experience in designing instructional courses and programs using
Bloom’s Taxonomy.
• Skilled
in designing applications based technical training.
• A
B.S./B.A. in instructional design, training and development, human resources
development, organizational or management development, or equivalent. A
master’s degree is preferred.
• Workplace
learning and performance certification (preferred). Certified Professional in
Learning Performance (CPLP), Certified Performance Technologist (CPT), etc.
• Proficiency
in consulting.
• Excellent
writing and verbal communications skills.
Apply Now
Rotating Equipment Engineer
Minimum Requirements
1.EDUCATION: B.S. in Engineering.
2.EXPERIENCE: At least 9 years experience, preferably in in
Plant Rotating Equipment and Hydraulic Study and Simulations Piping, Valves
& fittings, in Oil/Refined products process operation (preferably in Truck
loading/offloading facilities (Depots) Distribution and/or Terminal Operation)
such that the incumbent is clearly recognized as an expert in his field.
Experience must be such that the incumbent is clearly recognized as being
capable of project and design assignments and qualified to an outstanding degree
in one or another "Specialist" category.
3.LANGUAGE REQUIREMENTS: No second language is required.
4.OTHER: Must have a thorough knowledge of engineering
practices and economic principles, calculation methods, design details, U.S.
and Aramco's Codes, Standards and Specifications.
Apply Now
Inspector Engineer (Mechanical)
Minimum Requirements
•As the successful candidate, you will hold a Bachelor's
degree in Mechanical Engineering with a minimum of 8 years of professional
experience, preferably in the oil or similar process industry
•Certified for API 570 and API 653 with good experience in
welding inspection and engineering experience in reviewing design packages.
•Thorough understanding of Middle East Inspection codes and
standards
Apply Now
Inspector Engineer (Mechanical)
Minimum Requirements
•As the successful candidate, you will hold a Bachelor's
degree in Mechanical Engineering with a minimum of 8 years of professional
experience, preferably in the oil or similar process industry
•Certified for API 570 and API 653 with good experience in
welding inspection and engineering experience in reviewing design packages.
•Thorough understanding of Middle East Inspection codes and
standards
Apply Now
Instrument/Process Control Engineer (Engineer I) –
Unconventional
Minimum Requirements •
A bachelor’s degree in Process Control/Instrumentation Engineering or a higher
qualification from an accredited university, MS is preferred.
• A Professional Engineer (P.E.) or Chartered Engineer
(C.Eng.) license or registration will be desirable but is not essential
• At least 10 years of experience in the industrial
operation facility, Shale gas facility is preferred.
• Must has experience in the instrumentation/control system
design upgrades and improvements, troubleshooting field instrumentation,
investigating instrumentation/control system incidents including preparation of
technical reports, identifying the root cause and provide necessary
recommendations.
• Must be knowledgeable with national and international
safety standards; specifically from IEC, API, ASTM and NACE.
• Has a hand on experience in most of Distributed Control
System (DCS), Emergency Shutdown System (ESD) and other PLCs Controllers.
• Experience with creating/reviewing the P&IDs and ILDs
and other control drawings
• Experience with troubleshooting Complex control systems
failure, including DCS, ESD, CC and PLC system
• Study in depth the instrumentation and control philosophy
for the plant and provide engineering technical support to maintain DCS, ESD,
CCC and PLC systems such as Honeywell & Yokogawa DCS systems and ESD
systems.
• Experience with Instrumentation systems field
Installation, Commissioning and Energizing.
• Experience in specifying and layout of instrumentation
cables via cable trays, duct banks or direct buried.
• Capable of communicating with multidiscipline engineers to
complete projects
• Proven ability to communicate effectively with management
at all levels within the organization. Capable of spotting and reconciling
conflicting views and interests among different parts of the organization
• Strong written and oral communication skills. Able to
communicate what are frequently complex technical, economic and commercial
concepts in a clear and succinct manner to individuals and groups from diverse
professional backgrounds.
• Hands-on person who will immediately command the
professional respect of others who possess long-time practical experience of
working in or serving the industry. Person whom others, at all levels, will
seek out for advice and counsel.
• Able to work effectively with the minimum of supervision
on relatively unstructured tasks
Apply Now
Hydroprocessing Engineer
Minimum Requirements T
he successful candidate must have the following experience,
competencies & skillsets:
BS in Chemical Engineering (Advanced degree preferred).
Must have 10 years of industry experience in the design and
operation of hydroprocessing facilities, and in the latest technologies from
the production of clean fuels.
Demonstrate excellent computer skills as well as excellent
oral/written presentation skills.
Must possess excellent command of spoken and written English
Apply Now
Motor & Generator Engineer
Minimum Requirements
The successful candidate must have the following experience,
competencies & skillsets:
Bachelor’s degree in electrical engineering degree from an
accredited university. A Professional Engineer (P.E.) or Chartered Engineer
(C.Eng.) license or registration would be desirable but is not essential.
Ten years’ field experience in the oil and gas industry
specializing in the motor and generators.
Must be familiar with international standards related to
motors and generators: API, IEC, NEMA MG-1, NEC and IEEE.
Capable of troubleshoot, investigate and provide complex
technical consultations.
Must be familiar with the following:
• Electrical network interactions with Motor Generators.
• Motor and Generator repair
• Classified area Motors requirements.
Willing to mentor local engineers and provide training
programs.
Must be able to give strong technical presentations with
high quality technical report and paper writing skills in English.
Should have at least 3 written technical publications and/or
papers.
Possess excellent command of spoken and written English.
Apply Now
Compressor and Steam Turbine Engineer
Minimum Requirements
The successful candidate must have the following experience,
competencies & skillsets:
Bachelor’s degree in Mechanical Engineering or higher
qualification from an accredited university. A Professional Engineer (P.E.) or
Chartered Engineer (C.Eng.) license or registration would be desirable but is
not essential.
Fifteen years of direct Rotating Equipment experience in
refineries, chemical plants, power and utilities plants, gas plants or similar
working facilities working in an engineering function to resolve plant
machinery and operational problems.
Ten years’ experience in analyzing performance of,
troubleshooting, selecting, and maintenance of process gas compressors, steam
turbines, gearboxes is required.
Experience shall include mechanical seals troubleshooting,
and basic vibration analysis experience.
Detailed knowledge of international codes and API standards
is required to support the review of company standards, project reviews, and
implementation of plant modifications to compressors and steam turbines.
Experience in solving large process gas compressors
mechanical failures are required.
Experience in a Reliability Unit handling rotating equipment
for an industrial plant is desirable.
Demonstrate excellent technical report writing and
presentation skills.
Possess excellent command of spoken and written English.
Apply Now
HIPS Dynamic Simulation Engineer
Minimum Requirements
A minimum of 10 years field experience in the oil and gas or
petrochemical industry, including leadership of dynamic simulation studies
associated with the application of safety instrumented systems (ESD and HIPS).
This will include a senior engineering role in the areas of upstream high
pressure wellhead applications where HIPS were used to protect downstream
equipment from overpressure.
Expert knowledge of dynamic simulation/pipeline flow
assurance software, including OLGA in support of HIPS applications.
Knowledge of design alternatives to accommodate the response
limitations of HIPS, including fortified zones in downstream flowlines,
increased flowline diameters, reduced rates, etc. (participation in a deepwater
riser study will be a plus).
Must be knowledgeable with national and international safety
standards; specifically the IEC, API, ASTM and NACE standards.
Must have excellent written and verbal English skills with
proven experience of writing dynamic simulation reports and publications, and
be able to present technical results to a diverse audience of managers and
engineers.
Previous experience of working with multidisciplinary and
multicultural groups.
Apply Now
Gas & NGL Facilities Planning Engineer
Minimum Requirements
A bachelor’s or master’s degree in Chemical Engineering or
other related degree from an accredited university. A Professional Engineer
(P.E) or Chartered Engineer (C.Eng.) license or registration would be desirable
but is not essential.
A minimum of 15 years of professional experience, including
at least 10 years as a specialist within gas processing/NGL operations and/or
capital program planning.
Experienced in performing economic evaluations, feasibility
studies and preparing requests for budgetary approvals within the oil and gas
industry.
Experience with a professional consultant in planning and
executing engineering studies.
Experience in process/system simulation of gas processing
and NGL operations.
Must be able to demonstrate the ability to prepare budgetary
reports and deliver technical presentations to corporate management.
Apply Now
chemical engineering
Minimum Requirements
• B.S. degree in Chemical Engineering (advanced degree
preferred).
• A minimum of 12 years of experience in the oil and gas
industry, with experience in technical support, process design, mass and energy
balance calculations, studies, PFD development, and economic evaluations in
project planning/development, design and construction areas.
• Experience in conducting economic evaluations of projects.
• Experience in developing projects throughout the project
life cycle.
•Experience must be such that you are clearly capable of
project and design assignments beyond the ability of the basic professional
engineer.
• Thorough knowledge of engineering practices and economic
principles, calculation methods, design details, international & Aramco
codes, standards and specifications.
• Excellent written and spoken English is required to
perform analyses and studies in depth, make professional presentations and keep
up with technical advancements
Apply Now
Senior Process Engineer
Minimum Requirements
The successful candidate must have the following experience,
competencies and skillsets:
o A Bachelor of Science degree in Chemical Engineering from
internationally recognized academic institution.
o Minimum of ten years of operational experience exclusively
in NGL Processing Facility.
o Sufficient experience in investigating process upsets and
incidents.
o Familiarity with the use of process simulation software
such as HYSYS and PRO II.
o Good command of English written and oral communications.
o Experience in coaching and mentoring young engineers.
o Spirit for team work and leadership skills.
Apply Now
Chemical Engineer
Minimum Requirements
As the successful candidate, you will hold a minimum of a
bachelor's degree in chemical engineering or a related science from a
recognized and approved program.
In addition, you must have a thorough knowledge of
engineering practices and economic principles, calculation methods, and design
details.
You will have 9 years of industrial experience, preferably
in the oil industry or similar process industry.
Apply Now
Fire Protection Engineer
Minimum Requirements
1. EDUCATION: B.S. in engineering.
2. EXPERIENCE: Five years of professional experience,
preferably in the oil or similar process industry.
3. LANGUAGE REQUIREMENTS: A thorough knowledge of English is
required to perform work as described; make clear and concise verbal and
written reports; and keep up with technical advancements. Arabic is not
required, but is desirable for American incumbents in this position.
4. OTHER: Must have a thorough knowledge of engineering
practices and economic principles, calculation methods, design details, U.S.
and Aramco codes, standards and specifications
Apply Now
Mechanical Engineer
Minimum Requirements The
successful candidate must hold (as a minimum) a Bachelor of Science degree in
mechanical engineering from an accredited institution.
The academic credential must be coupled with a minimum of
ten (10) years of work experience in the maintenance and reliability field at
oil and gas facilities, and related engineering practices and international standards.
Five (5) years of working knowledge of probability/statistics principles,
computerized maintenance management systems and notable reliability engineering
tools are required.
The candidate must be fluent in spoken and written English,
and have the ability to develop and present ideas concisely and clearly. The
candidate must also show skills in process management and improvement, project
planning, mentorship and leadership.
Apply Now
Fire Protection Engineer
Minimum Requirements
1. EDUCATION: A B.S. in engineering.
2. EXPERIENCE: Nine years of professional experience,
preferably in the oil or similar process industry.
3. LANGUAGE REQUIREMENTS: A thorough knowledge of English is
required to perform work as described; make clear and concise verbal and
written reports; and keep up with technical advancements. Arabic is not
required, but is desirable for American candidates.
4. OTHER: Must have a thorough knowledge of engineering practices
and economic principles, calculation methods, design details, U.S. and Aramco
codes, standards, and specifications.
